Lotus Elan

Lotus Elan Plus 2 Clutch Hose and Pipe Routing

PostPost by: 1969Elan » Mon Jul 22, 2019 5:14 pm

Hi, I am going back to standard routing of the Clutch Hydraulic Pipe’s and hoses for my 1969 Elan Plus 2.

I am looking for some advice or photos of the routing and fixing points from the Master Cylinder to the Slave Cylinder.

Thank You in Anticipation.
1969Elan
New-tral
 
Posts: 4
Joined: 11 May 2018
Location: Ayrshire

PostPost by: gus » Tue Jul 23, 2019 4:09 pm

Originally it went through a hole in the chassis and the red hose was formed with a right angles, so there wasn't a lot of variance.
gus
Fourth Gear
Fourth Gear
 
Posts: 617
Joined: 05 May 2011

PostPost by: 1969Elan » Tue Jul 23, 2019 4:22 pm

Thank you for your reply.

I have now routed the pipe down to a new fixin :idea: g bracket at the engine RHS mounting to a flexible hose mounting at one of the bottom Bell-housing Bolts.
1969Elan
New-tral
 
Posts: 4
Joined: 11 May 2018
Location: Ayrshire

Total Online:

Users browsing this forum: No registered users and 9 guests