Lotus Elan

Spinner tool

PostPost by: Orangerover » Wed Feb 10, 2016 10:46 pm

Hi ,
New here but owned and still own lotus 7 , Elan sprint , early mini etc .
Here is my take on a spinner tool made with steel stock lying around the workshop.
Need to slip some rubber hose over the forks .
I've had the Tourque wrench on up to 220ft lbs with an old spinner .
Attachments
image.jpeg and
Orangerover
New-tral
 
Posts: 14
Joined: 10 Feb 2016
Location: Northumberland

PostPost by: jono » Thu Feb 11, 2016 7:34 am

...welcome on board Neilson!

PS: put your self down for a CR gearset - need to get the numbers up :D (see my thread)

It will make your Sprint 'sing' :wink:

Jon
jono
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1575
Joined: 17 May 2007
Location: The wet bit in the top corner of England

PostPost by: Orangerover » Sat Feb 13, 2016 4:29 pm

jono wrote:...welcome on board Neilson!

PS: put your self down for a CR gearset - need to get the numbers up :D (see my thread)

It will make your Sprint 'sing' :wink:

Jon

Ha ! Spotted !
Nearly ready for a road test - if the box isn't perfect I'll have a gear set .
Orangerover
New-tral
 
Posts: 14
Joined: 10 Feb 2016
Location: Northumberland

Total Online:

Users browsing this forum: No registered users and 5 guests