3 eared spinner knock off tool
Posted: Mon Dec 10, 2018 11:48 amI have purchased from a guy on ebay a tool for using on +2 130 alloys, he normally sells the octagonal ones but made one for spinners.
It needs a 36mm six point socket and cost ?54.50, my only concern was that it is not a tight fit on the lugs but with a small piece of towelling over the spinner it works fine and protects the chrome.
Hope this is of interest. John
It needs a 36mm six point socket and cost ?54.50, my only concern was that it is not a tight fit on the lugs but with a small piece of towelling over the spinner it works fine and protects the chrome.
Hope this is of interest. John