Lotus Elan

Shims - getting someone to do in Sydney, Australia

PostPost by: gordont » Tue Dec 08, 2009 4:23 am

I suspect (from the chatter) that my (camshaft) shims need redoing, I admit a bit out of my depth so hoping that someone on here can point me in teh direction of any businesses/mechanics in Sydney that I can trust to do this?

Thanks in anticipation :(
Gordon
26/5416
gordont
Fourth Gear
Fourth Gear
 
Posts: 617
Joined: 11 Jun 2007
Location: Sydney, Australia

PostPost by: gazzweld » Wed Dec 09, 2009 10:50 pm

You could try Cremorne Prestige at Artarmon. I havn`t had any work done by them, but the word is good.They advertise in the Club Lotus Australia newsletter. www.cremorneprestige.com.au
,cheers Gary.
gazzweld
New-tral
 
Posts: 1
Joined: 08 Dec 2009
Location: Coolah,NSW,Australia.

PostPost by: robertverhey » Thu Dec 10, 2009 9:23 am

Or if you're confident to remove the camshafts, you could buy yourself a set of feeler gauges and a vernier gauge (the digital ones are easy as pie to use), and work out what shims you need compared to what's there.... Steve at Elan Factory, from memory, will supply exchange shims in requested thicknesses.

Robert
robertverhey
Fourth Gear
Fourth Gear
 
Posts: 781
Joined: 20 Feb 2007
Location: Sydney Australia

PostPost by: gerrym » Thu Dec 10, 2009 8:20 pm

Gordon, suggest you start by measuring the clearances: presume you have a workshop manual and can order up in advance cam cover gasket, sealant, selocs etc. Elan Factory will send you want you need.

Regards

Gerry
gerrym
Fourth Gear
Fourth Gear
 
Posts: 894
Joined: 25 Jun 2006
Location: Aberdeen Scotland

Total Online:

Users browsing this forum: No registered users and 7 guests