Cosworth BDJ $4800 on race cars
7 posts
• Page 1 of 1
Is there anyone here that would have any interest in some Cosworth BDJ now listed on race-cars.com?
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10)
Badger forged Pistons 81mm, 41.8 to 41.825 pin height.
http://www.race-cars.com/engsales/coswo ... 4671ss.htm
James
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10)
Badger forged Pistons 81mm, 41.8 to 41.825 pin height.
http://www.race-cars.com/engsales/coswo ... 4671ss.htm
James
Last edited by holywood3645 on Sun Mar 09, 2014 1:29 am, edited 4 times in total.
-
holywood3645 - Coveted Fifth Gear
- Posts: 1102
- Joined: 07 Oct 2003
Hello James
I am interested in the kent parts. Sending PM
I am interested in the kent parts. Sending PM
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1434
- Joined: 26 Sep 2003
Hi James,
I am interested in most of the parts, the BDJ stuff for my '76 Modus FC car and the pushrod NCF stuff for my Lotus FJr.. Normally, BDJ/ BDH blocks are shorter than twin-cam,, same as a 105E, but 5 main bearing. They are usually 711M blocks but differ from the 1600 Pinto block by the AA or AB suffix, don't remember which.
I'm sending you a PM, but I don't trust them since last time I did, I got no response.
Roger (SARL forty-five at hotmail dot com)
I am interested in most of the parts, the BDJ stuff for my '76 Modus FC car and the pushrod NCF stuff for my Lotus FJr.. Normally, BDJ/ BDH blocks are shorter than twin-cam,, same as a 105E, but 5 main bearing. They are usually 711M blocks but differ from the 1600 Pinto block by the AA or AB suffix, don't remember which.
I'm sending you a PM, but I don't trust them since last time I did, I got no response.
Roger (SARL forty-five at hotmail dot com)
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Coveted Fifth Gear
- Posts: 2518
- Joined: 23 Nov 2008
Oh and James, please send some photos of the injection components.
Roger
Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Coveted Fifth Gear
- Posts: 2518
- Joined: 23 Nov 2008
Photos sent.
Complete List as follows:
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10) $1000
Badger forged Pistons 81mm, 41.8 to 41.825 pin height
Cross flow head, FF
40 DCOE to crossflow manifold
Cosworth valve cover pushrod Kent
Twin 40DCOE31s
Hilborn Injection BDA
ATI Alloy ford 1600cc sump (sold)
Smiths Heater VGC
Weber back plate
KARB Ford alloy rocker cover. Rocker shaft intergral to cover.
General pics of parts below: Open to Offers!
Complete List as follows:
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10) $1000
Badger forged Pistons 81mm, 41.8 to 41.825 pin height
Cross flow head, FF
40 DCOE to crossflow manifold
Cosworth valve cover pushrod Kent
Twin 40DCOE31s
Hilborn Injection BDA
ATI Alloy ford 1600cc sump (sold)
Smiths Heater VGC
Weber back plate
KARB Ford alloy rocker cover. Rocker shaft intergral to cover.
General pics of parts below: Open to Offers!
-
holywood3645 - Coveted Fifth Gear
- Posts: 1102
- Joined: 07 Oct 2003
James,
Sent you a pm asking for prices on each of the BDA parts.
Thanks,
Greg
Thanks,
Greg
Sent you a pm asking for prices on each of the BDA parts.
Thanks,
Greg
Thanks,
Greg
-
elangtv2000 - Third Gear
- Posts: 240
- Joined: 07 Jun 2006
Just posted the BDJ as a kit on race-cars.com
$4800
1098 BDJ for sale Cosworth , Steel crank, New 81mm piston, Block Steel caps (81mm) cam tray and BDJ 3.545" thick head, Cam cover. fitted with Hilborn injection system etc
http://www.race-cars.com/engsales/coswo ... 4671ss.htm
$4800
1098 BDJ for sale Cosworth , Steel crank, New 81mm piston, Block Steel caps (81mm) cam tray and BDJ 3.545" thick head, Cam cover. fitted with Hilborn injection system etc
http://www.race-cars.com/engsales/coswo ... 4671ss.htm
-
holywood3645 - Coveted Fifth Gear
- Posts: 1102
- Joined: 07 Oct 2003
7 posts
• Page 1 of 1