2 post lift, frame support jig
Posted: Wed Jan 30, 2019 8:13 pm
I know the glass fiber body is fairly strong for lifting.
My hoist grabs the body only, rather than the frame.
My plan is, to have arms. Which attach/slide-into the existing lift arms of my two post hoist.
I obviously flunked out of Drafting in school, though I hope you get the idea.
The Bow is wider, and stern more narrow. So as to not touch cars A (control) arms.
A soft rubber or wood stability block will be added to the hoists arm to support wobble. I would mill the soft wood to be a tight fit.
Any and all thoughts appreciated.
My hoist grabs the body only, rather than the frame.
My plan is, to have arms. Which attach/slide-into the existing lift arms of my two post hoist.
I obviously flunked out of Drafting in school, though I hope you get the idea.
The Bow is wider, and stern more narrow. So as to not touch cars A (control) arms.
A soft rubber or wood stability block will be added to the hoists arm to support wobble. I would mill the soft wood to be a tight fit.
Any and all thoughts appreciated.