Apologies for all the questions but

[TomMull]

This doesn't seem right. The rotor clears the wishbone arm by about 3mm. About the same on both sides.

Tom

[types26/36]

Looks about right to me.

[bitsobrits]

[quote="TomMull"]This doesn't seem right. The rotor clears the wishbone arm by about 3mm. About the same on both sides.

wishbone.jpg

"A miss is as good as a mile"- Colin Chapman

Okay, maybe he didn't say that, but he certainly built cars that way.

[Foxie]

"A miss is as good as a mile"- Colin Chapman

That was also my immediate thought !

[TomMull]

OK then, thanks to both, scratch one off my lengthy worry list. Tom

[wotsisname]

yes it's all quite tight in that area. outer wishbone bolts have to have pretty minimal heads to clear the wheel rim. position of tyre weights needs to be checked. A good idea to check the run-out of the various components, particularly if you pull the driveshafts.

[Rich135]

OK then, thanks to both, scratch one off my lengthy worry list. Tom

I thought exactly the same when I first got under mine Tom - they all do that!

Cheers

Rich