Elan Engine Bays - stock, modified, restored, and 26r
68 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
davidj wrote:I don't suppose anyone has a picture of the plate so I can fabricate something. However, I am tempted to glass and fill the holes as the engine bay is being painted anyway. For a rhd car which holes do I need on the left hand side? Two holes on the top left have grommets, so may have been used. Are any used for the wiring loom?
Cheers,
David
David, here are two shots of the cover on my lhd S3 Coupe, #5727.
Greg Z
45/0243K Sprint
45/7286 S3 SE DHC
45/0243K Sprint
45/7286 S3 SE DHC
-
gjz30075 - Coveted Fifth Gear
- Posts: 3500
- Joined: 12 Sep 2003
The original plate was made from "mill board", same material as is fitted in the boot. On an S4 I rebuilt the original one was just screwd in. see pic below, sorry about the quality
cheers
Mark
ps you need all of the holes
cheers
Mark
ps you need all of the holes
-
mark030358 - Coveted Fifth Gear
- Posts: 1182
- Joined: 29 May 2004
Hi guys, I have recently acquired a very early S2 down here in Australia, and am embarking on a full restoration (pity me....). It was originally imported from England in December 1964 (VIN 26/4193, body 3186, engine LP2625LBA, all original according to Lotus in England). I have a certificate to that effect from Andy Graham (great bloke!), but it doesn't tell me the original colour. Heavy sanding through at least three resprays clearly indicates it was Carmen Red, so that's what it's going to be again. But I really want to know whether the engine bay and boot interior should be body colour, gel coat colour (light grey?) or black.
Is there a definitive answer, or is it like my taillights (still S1) - whatever was to hand at the time it left the factory?
A supplementary if I may: do any of my Aussie colleagues know whether the early records of Geoghan's Pty Ltd (theLotus importers in the '60's) are still available for scrutiny? If yes, where?
Many thanks for your help in anticipation!
Terry
Is there a definitive answer, or is it like my taillights (still S1) - whatever was to hand at the time it left the factory?
A supplementary if I may: do any of my Aussie colleagues know whether the early records of Geoghan's Pty Ltd (theLotus importers in the '60's) are still available for scrutiny? If yes, where?
Many thanks for your help in anticipation!
Terry
- fjrtel
- First Gear
- Posts: 17
- Joined: 20 Oct 2019
Terry, black.
Tim
Tim
Visit www.lotuselansprint.com
-
trw99 - Coveted Fifth Gear
- Posts: 3269
- Joined: 31 Dec 2003
68 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Total Online:
Users browsing this forum: No registered users and 12 guests