1. Details of fixing a radio are contained in Section 'M' of the Workshop Manual.
2. The Phillips radio receiver is earthed to a convenient main chassis earthing bolt.
3. Details of fitting the aerial are contained in Section 'M' of the Workshop Manual.
4. The Speaker is fitted in the rear quarter trim backboard.

SUPPRESSION
To give a reduction of interference to an acceptable standard, the following is recommended;

Filtering:

• Voltage stabiliser V terminal to T terminal, using suppressor CRS 114.
• Coil - mount as shown in Fig,'. 1 . using suppressor CRS 102.

Bonding: Bonding braids are fitted as follows.

• Use braid (CRE 105) from coil mounting bolt to top bolt on oil pump housing.
• Use braid (CRE 124) from aerial mounting to a convenient chassis earth.