Lotus Service Bulletin - Waterproofing of Doors


Lotus Service Bulletin

Class 111
Number 1972/02
Type Elan
Date 14.04.1972
Title: Waterproofing of Doors
Reason: To prevent the possibility of water seeping through the door panel via the upper drain hole.
Parts Required: Snapsac
Tubing    		 428A                    2 per car
X036 B6309V   2 per car
Action:
  1. In approximately June 1971, the following modification was incorporated into Production and can be used to rectify cars built before that time.
  2. Cut the closed end from a Snapsac and insert the into the upper drain hole at front of the door.  Remove door trim panel (see Section 'B' of Workshop Manual ) and push a piece of tubing over the open end of the Snapsac which is now inside the door. 
  3. This action will channel the water from the upper drain hole to the lower drain hole, thence out of the door.

Top of Page
Page Views:  23

Body

Valid XHTML 1.0 Transitional Valid CSS! This site is hosted by Site5!