Lucas l807 light screw thread size?
7 posts
• Page 1 of 1
Hi can anyone confirm the screw thread size for the 4 screws that hold the lens on
I have new screws but one female thread is crossed so I want to retap it
Thanks steve
I have new screws but one female thread is crossed so I want to retap it
Thanks steve
- Concrete-crusher
- Third Gear
- Posts: 402
- Joined: 09 Jun 2013
get yourself a set of BA thread taps ... or at least the one which is the corresponding size
https://britishfasteners.com/threads/
https://britishfasteners.com/threads/
-
RichC - Fourth Gear
- Posts: 829
- Joined: 28 Apr 2009
Thanks for reply, my screws have a dia of just over 3mm
Steve
Steve
- Concrete-crusher
- Third Gear
- Posts: 402
- Joined: 09 Jun 2013
Which kind of rear light is the Lucas 1807? (Should that be L807?)
If it's the S4 / Sprint rear light it takes 6.32 UNC x 1??. At least that's what fitted perfectly when I once renewed them, not 4BA.
PS if you're replacing the screws it's a good idea to use stainless steel cap head screws which are much easier to unscrew when you need to remove them years later.
If it's the S4 / Sprint rear light it takes 6.32 UNC x 1??. At least that's what fitted perfectly when I once renewed them, not 4BA.
PS if you're replacing the screws it's a good idea to use stainless steel cap head screws which are much easier to unscrew when you need to remove them years later.
Robert
- rcraven
- Third Gear
- Posts: 252
- Joined: 23 Oct 2007
7 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 25 guests